Awesome. I'm thinking I might have to go that way too welding the pipe on. Did it bend much from the welding heat? That is my biggest worry.37fordpu wrote:The tops of the sides are pipe welded on as it seemed the easiest way for me to get what I wanted.The tailgate skin came from a company in Yandina called BMV. http://www.google.com/search?client=fir ... ngineering They do quite a few different makes .
1937 ford pickup build
- Gojeep
- Old Hand
- Posts: 7329
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: 1937 ford pickup build
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
-
- Posts: 194
- Joined: Tue Aug 12, 2014 4:30 pm
- Location: sunshine coast
Re: 1937 ford pickup build
No it went quite well .The sides are 1.6 mm zinc anneal.I'm sure a person of your metal skills will be able to do a better job than me.
- Ed
- Member
- Posts: 507
- Joined: Fri May 05, 2006 12:41 pm
- Location: Malabar
Re: 1937 ford pickup build
Nice build, looks like we are at a similar stage in progress with the build.
I got one of the Ford script tailgates off Chris as well, A very well made piece.
Also used 1.6mm zinc anneal for my bedsides with welded pipe on top too.
Marcus yes, the tube can bend if too much heat is applied.
I may have to run some weld on the opposing side to pull it back in a spot. A trick you have demonstrated!
Cheers
Ed
I got one of the Ford script tailgates off Chris as well, A very well made piece.
Also used 1.6mm zinc anneal for my bedsides with welded pipe on top too.
Marcus yes, the tube can bend if too much heat is applied.
I may have to run some weld on the opposing side to pull it back in a spot. A trick you have demonstrated!
Cheers
Ed
Yes... it will be a car
- Gojeep
- Old Hand
- Posts: 7329
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: 1937 ford pickup build
Many thanks for the feedback. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
- FRANK BASILE
- Old Hand
- Posts: 13902
- Joined: Wed May 07, 2003 3:14 pm
Re: 1937 ford pickup build
Nice work. Good initiative with the running boards. When a "pro" has "cannot do" attitude, having a go yourself can be rewarding. The "Hot Rod Creed" when faced with a problem. "Adapt ,Modify, Overcome"
OZ-E-Rodders Rod and Kustom Club Member #31
-
- Posts: 437
- Joined: Sun Jun 16, 2013 12:05 am
- Location: QLD
Re: 1937 ford pickup build
Dunno about that. Around here the creed seems to be cover the eyes and ears, don’t talk about it, abuse those that do talk about it, and then just give up...FRANK BASILE wrote:
.....The "Hot Rod Creed" when faced with a problem. "Adapt ,Modify, Overcome"
![Wink :wink:](./images/smilies/icon_e_wink.gif)
.
--------------------------------------------------------------------
The world's most viewed site on global warming and climate change... http://wattsupwiththat.com/
Australia’s most viewed site on global warming... http://joannenova.com.au
The world's most viewed site on global warming and climate change... http://wattsupwiththat.com/
Australia’s most viewed site on global warming... http://joannenova.com.au
- FRANK BASILE
- Old Hand
- Posts: 13902
- Joined: Wed May 07, 2003 3:14 pm
Re: 1937 ford pickup build
UteWorks wrote:Dunno about that. Around here the creed seems to be cover the eyes and ears, don’t talk about it, abuse those that do talk about it, and then just give up...FRANK BASILE wrote:
.....The "Hot Rod Creed" when faced with a problem. "Adapt ,Modify, Overcome"
![]()
Always handy to keep a chair nearby to sit and ponder the mistakes, lick the wounds and go back for another belting. If you give up then the joy of completion is never realised in a timely manner if at all. Yep, we all have most likely gone through the motions you describe Uteworks.
.
OZ-E-Rodders Rod and Kustom Club Member #31
-
- Posts: 194
- Joined: Tue Aug 12, 2014 4:30 pm
- Location: sunshine coast
Re: 1937 ford pickup build
I looked for several years for running boards and eventually gave up and made my own.Recently I was visiting friends in Toowoomba on the same weekend as their swap but I hadn't planned on going but as our friends lived within walking distance I weakened and had a look. There among all the treasure I found a great pair of running boards and a pair of early ford horns.Amazing what turns up when you aren't looking
![Image](https://i.postimg.cc/fWV3mJ4c/20200217-103236.jpg)
![Image](https://i.postimg.cc/LXbpm9NR/20200217-103408.jpg)
![Image](https://i.postimg.cc/fWV3mJ4c/20200217-103236.jpg)
![Image](https://i.postimg.cc/LXbpm9NR/20200217-103408.jpg)
- Gojeep
- Old Hand
- Posts: 7329
- Joined: Mon Jan 07, 2008 1:24 pm
- Location: Eastern Suburbs of Melbourne
- Contact:
Re: 1937 ford pickup build
Nice score. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Marcus
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!
____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
-
- Posts: 194
- Joined: Tue Aug 12, 2014 4:30 pm
- Location: sunshine coast
Re: 1937 ford pickup build
![Image](https://i.postimg.cc/Jn0kzb2Q/20200323-112100.jpg)
It seems I have a lot of time to work on my project for a while so I stripped it down to finish some small bits of welding and start to run fuel and brake lines .As I only have single carport to work in it is a bit of a challenge to find room for all the parts but this is the second car I have built in a single carport so I just make the best of it.I also thought I had better post again before I forgot how to post photos
- rx4ord
- Old Hand
- Posts: 6853
- Joined: Tue Jan 11, 2005 8:08 pm
- Location: Tasmania! Tasmania!
Re: 1937 ford pickup build
Looking the goods.
Keep posting pics and we will all be very happy.
Thanks.
Tassie Dave
Keep posting pics and we will all be very happy.
Thanks.
Tassie Dave
Founding Member of OZ-E-Rodders
-
- Posts: 194
- Joined: Tue Aug 12, 2014 4:30 pm
- Location: sunshine coast
Re: 1937 ford pickup build
After a long break I am starting to get the pickup ready for paint. I had my 2nd inspection a while back and I just want it on the road,
[img]https://i[url=https://postimg.cc/rDhL2QY1]
.postimg.cc/cCz4n4hR/20240117-070120.jpg[/img][/url]
[img]https://i[url=https://postimg.cc/rDhL2QY1]
![Image](https://i.postimg.cc/k5CM8HQp/20220603-075640.jpg)
-
- Posts: 194
- Joined: Tue Aug 12, 2014 4:30 pm
- Location: sunshine coast
- Jeff Hitchins
- Posts: 493
- Joined: Wed Feb 02, 2005 3:24 pm
- Location: Perth WA
Re: 1937 ford pickup build
Good to hear you are still working on it. Perseverance is the key.
- 46OzHudson
- Posts: 313
- Joined: Thu Apr 07, 2016 11:41 am
- Location: WA
Re: 1937 ford pickup build
Good work mate, looks like you're on the home stretch now
"It's not perfect but it's progress"