Louvres

Chrisso · Post by **Chrisso** » Wed Mar 22, 2023 4:38 pm

Just wondering if anyone had a contact number for Neil Stamp in Wangaratta as hei the only guy I know that does louvres in car bits. Any tips would be helpful.

Gojeep · Post by **Gojeep** » Wed Mar 22, 2023 8:30 pm

Do you have a shop press?
You can buy the tooling from Hare and Forbes.

Probably be a lot cheaper and could make a bit on the side helping out others

https://www.machineryhouse.com.au/p1173

https://www.machineryhouse.com.au/p1174

Chrisso · Post by **Chrisso** » Thu Mar 23, 2023 7:24 pm

Thanks Marcus worth considering,

46 deluxe · Post by **46 deluxe** » Thu Mar 23, 2023 8:15 pm

Are you considering louvers on the pilot Chrisso ?

HOT ROD FRED · Post by **HOT ROD FRED** » Wed Mar 29, 2023 9:14 am

Keith Stamp is in Wangaratta.His brother Neil I think is in Bendigo.Keith was always the go to man for louvres, but since his stroke about 20 years ago, not sure.I don't have phone no's, sorry.

Jeff Hitchins · Post by **Jeff Hitchins** » Wed Mar 29, 2023 1:04 pm

If you have a bead roller then Hare and Forbes also have these which might work depending on what panel shape you were working on

MBR-LST - Louvre Bead Roller Set $110 inc gst at present

https://www.machineryhouse.com.au/s6333

Harv · Post by **Harv** » Wed Mar 29, 2023 1:23 pm

There is a gentleman in Wollongong who stamps louvres. His son is on the FB/EK Holden forum with the username Harko. A post or PM over there will likely find him.

http://www.fbekholden.com/forum/index.php

Cheers,
Harv

Ozrodders.com

Louvres

Louvres

Re: Louvres

Re: Louvres

Re: Louvres

Re: Louvres

Re: Louvres

Re: Louvres