Louvres

Go here for info on chassis construction, body work and suspensions
Post Reply
User avatar
Chrisso
Old Hand
Posts: 4178
Joined: Thu Apr 12, 2012 10:44 am
Location: Albury NSW

Louvres

Post by Chrisso »

Just wondering if anyone had a contact number for Neil Stamp in Wangaratta as hei the only guy I know that does louvres in car bits. Any tips would be helpful. :wink:
User avatar
Gojeep
Old Hand
Posts: 7326
Joined: Mon Jan 07, 2008 1:24 pm
Location: Eastern Suburbs of Melbourne
Contact:

Re: Louvres

Post by Gojeep »

Do you have a shop press?
You can buy the tooling from Hare and Forbes.

Probably be a lot cheaper and could make a bit on the side helping out others

https://www.machineryhouse.com.au/p1173

https://www.machineryhouse.com.au/p1174

Image
Marcus

To try where there is little hope, is to risk failure.
Not to try at all, is to guarantee it!


____| \______\
|/¯\ |¯ |----O||||O
()_)-o-)¯¯()_)-o-)_)
User avatar
Chrisso
Old Hand
Posts: 4178
Joined: Thu Apr 12, 2012 10:44 am
Location: Albury NSW

Re: Louvres

Post by Chrisso »

Thanks Marcus worth considering, :wink:
User avatar
46 deluxe
Old Hand
Posts: 3656
Joined: Sun Aug 17, 2003 12:50 am
Location: geelong vic

Re: Louvres

Post by 46 deluxe »

Are you considering louvers on the pilot Chrisso ?
scott
User avatar
HOT ROD FRED
Old Hand
Posts: 2521
Joined: Thu Apr 06, 2006 8:23 am
Location: Ringwood,Vic

Re: Louvres

Post by HOT ROD FRED »

Keith Stamp is in Wangaratta.His brother Neil I think is in Bendigo.Keith was always the go to man for louvres, but since his stroke about 20 years ago, not sure.I don't have phone no's, sorry.
User avatar
Jeff Hitchins
Posts: 493
Joined: Wed Feb 02, 2005 3:24 pm
Location: Perth WA

Re: Louvres

Post by Jeff Hitchins »

If you have a bead roller then Hare and Forbes also have these which might work depending on what panel shape you were working on

MBR-LST - Louvre Bead Roller Set $110 inc gst at present

https://www.machineryhouse.com.au/s6333

Image
Harv
Posts: 464
Joined: Fri Mar 22, 2013 9:11 am

Re: Louvres

Post by Harv »

There is a gentleman in Wollongong who stamps louvres. His son is on the FB/EK Holden forum with the username Harko. A post or PM over there will likely find him.

http://www.fbekholden.com/forum/index.php

Cheers,
Harv
Post Reply