VL Commodore Power Rack

Go here for posts about rebuilds, parts and problems
Post Reply
47merc
Posts: 23
Joined: Fri Mar 14, 2014 9:58 pm

VL Commodore Power Rack

Post by 47merc »

Fitting a Vl Commodore power rack in my 47 with an Astra electric pump.
Can anyone tell which fitting on the rack the high pressure fluid goes to. The large one or the smaller one.
Thanks
User avatar
FRANK BASILE
Old Hand
Posts: 13894
Joined: Wed May 07, 2003 3:14 pm

Re: VL Commodore Power Rack

Post by FRANK BASILE »

I will have a look at our VP tomorrow, I also have a GM manual for VB VC VH. Will look at that one for clues. Off the top of my head generally the small fitting is high pressure in . On my Jag rack this is the case , and the pinion housing is marked "In" "out" making life easy.
OZ-E-Rodders Rod and Kustom Club Member #31
Harv
Posts: 437
Joined: Fri Mar 22, 2013 9:11 am

Re: VL Commodore Power Rack

Post by Harv »

From the factory workshop manual:
VL Commodore power steering rack.jpg
Cheers,
Harv
You do not have the required permissions to view the files attached to this post.
47merc
Posts: 23
Joined: Fri Mar 14, 2014 9:58 pm

Re: VL Commodore Power Rack

Post by 47merc »

Thanks for the info guys. Very much appreciated.
Post Reply