Go here for info on chassis construction, body work and suspensions
- Old Hand
- Posts: 2242
- Joined: Tue Oct 31, 2006 12:31 pm
- Location: Keith S.A.
ram-rod wrote:hi Paul I think series 2&3 jag have different brake calipers from series 1. check the width of your discs with a set of verniers and ring your local brake place they will be able to tell you straight away If your discs are under size
sorry guys not wanting to take this off topic.
this calculator will be a very good thing thanks for taking the time fellas
Series 1- solid rotors : new 12.5.. Min. thickness 11.5mm
Series 2 & 3 Vented: new 24mm. Min. thickness 22.9mm
- Posts: 685
- Joined: Thu Aug 28, 2008 9:12 am
- Location: Melbourne SE suburbs. Vic.
If you are running coil overs, there is a mob in the UK called AVO that stock a really good range of springs.
http://www.avouk.com/Downloads/AVO%2022 ... PRINGS.pdf
If there is anyone in oZ that offers a similar wide range I would really like to know.
- Old Hand
- Posts: 2385
- Joined: Sun Jul 16, 2006 9:28 am
- Location: Brisvegas
- Posts: 1
- Joined: Thu Jul 30, 2015 9:32 pm
Your Clac looks the go...I'll try of few variables that I've used over the years.